Installation And Precautions Of Wood Plastic Floor

Wood plastic composite board is a mainly composed of wood (wood cellulose, cellulose) as a base material with thermoplastic polymer material (PE plastic) and processing additives, mixing after heating extrusion molding and mold equipment made of high-tech green environmental protection material, performance and characteristics of both wood and plastic. Can the new environmentally-friendly alternative to wood and plastic high-tech materials, the English Wood Plastic Composites abbreviation for WPC. The following editor will introduce you to the installation method and precautions of wood plastic floor.

The first is to install:

1. Keel Fixed

The use of fixed wood keel tube expansion directly to the wood keel is fixed on the ground above the plastic expansion pipe fixed point spacing in 500mm~600mm, screw cap requirements below the wood keel surface, wood keel fixed to the whole flat.

2. The Assembly Of The Three Decking

The wood plastic composite decking is Shanghai Qianxing wood flooring, with self tapping screws fixed on wood keel, require tapping screw nail cap and the wood surface, wood flooring in the floor is Shanghai Qianxing spacing 5mm wood plastic composite decking, floor at the start and end positions of the tapping screw will use wood plastic composite decking and wood keel fixed, screw nail cap and requirements wood plastic composite decking surface. The rest of wood plastic composite decking and fastening over wood keel are using plastic buckle wood plastic composite decking connection, and wood keel. Spacing of wood by plastic buckle. The decking is Shanghai Qianxing is selling its wood plastic composite decking, on the ground In the start and end position with tapping screws and wood flooring wood keel will be fixed, require tapping screw nail cap and wood surface. The remaining wood plastic composite decking and the fastening point between wood keel with stainless steel buckle wood plastic composite decking connection, and wood keel. wood plastic composite decking spacing by stainless steel buckle.

Followed by matters needing attention:

1. Wood plastic can be cut, sawed, drilled, and tenoned with ordinary woodworking machinery.

2. Fix the wood-plastic keel on the floor with an expansion tube. The distance between the fixed points of the expansion tube is 500mm-600mm, and the nut is lower than the surface of the wooden keel. The wooden keel needs to be fixed as a whole.

3. Self-tapping screws can be used for fastening between wood plastic and wood plastic. Stainless steel self-tapping screws are recommended for outdoor use; self-drilling and self-tapping screws should be used for wood plastic and steel plates.

4. When using self-tapping screws to fasten between wood plastic and wood plastic, pilot holes should be used first, that is, pre-drilled holes. The diameter of the pre-drilled hole should be less than 3/4 of the screw diameter.

5. When installing the outdoor floor, one screw on the left and right should be used between the wood-plastic profile and each keel.

6. The joints between the wood plastic floor and the keel are all fixed with plastic buckles to connect the wood plastic floor and the keel.

The above is the installation and precautions of wood plastic floor. You can install it with confidence. You can install it with confidence.

prev Post

The knowledge of Wood plastic composite material

Next Post

Cleaning Method Of Wood Plastic Composite Floor