Installation Of Wood Plastic Wall Panels

Wood plastic exterior wall board makes the building appear simple and natural and beautiful, can resist all kinds of bad weather, and anti-corrosion and flame-retardant, easy to install. No matter in the production process or in the engineering practice, it can not pollute the environment and can be reused, so it is an ideal decorative material for environmental protection.

The plastic wood composite Siding is light in weight, insulated, moisture-proof, flame-retardant, acid-alkali resistant, corrosion-resistant; stable, good dielectric, durable, anti-aging, easy to weld and bond; strong flexural strength and impact toughness, high elongation when rupture; smooth surface, Bright color, very decorative, wide application of decoration, simple construction technology, easy installation.Let's take a look at the installation of wood plastic wall panels together.

Installation Features:

The series of products according to personal preferences, choose horizontal, vertical loading, ramp loading and other installation methods, the general proposed vertical loading, because the light from the window into the interior light is horizontal, vertical and horizontal surface will be more obvious, more highlights Dimensional effect, and vertical loading can reduce dust accumulation, easy to clean. The series of products are used socket design, and the same series of different varieties of products are used universal socket jack design, that is, different styles of products can be used with each other to install, to the designer's personalized design to provide greater imagination . Because it is a socket-type design, therefore, only the installation location of the socket injections, and then plug-in, you can cover the nail and remove the dust from the steps. Other processing methods and solid wood, can be nailed, can be nailed, can be planed, without the paint, that is equipped with the general carpenters can be installed at the same time, light and fast, a familiar worker can install hundreds of square feet a day area.

From the professional consideration of installation, wood plastic wall panels cladding is suggested to be installed by professional construction personnel. Please clean the wall before installation and make the wall dry, smooth and clean. If there are construction industry regulations or local regulations, please install them according to the regulations.

1.Fixation of keel

Steel keel is aslo usually used. The space between keels should be less than 400 mm. The steel keel should be fixed on the wall with expansion screw. Antirust paint should be applied to the steel keel.

Or use our WPC keel,Install the plastic wood keel evenly and fix it on the flat wall with expansion Screws.It is recommended that the distance between each keel be less than 400mm.It need keep 3-5mm at the joint of the keel to keel to prevent expansion.When install the wpc keel,In the position of the expansion tube, drill the hole on the keel First,Then put the plastic expansion tube into the hole,Screw the screws into the expansion tube and fix the keel to the wall.the nail head should be all screwed into the keel, not exposed outside the keel, otherwise it may lead to uneven board surface.

2.Fixation of wood plastic wall panels

When installing the wood plastic wall panels, the stainless steel starting fastener should be used first to fixing the first piece board.

Step 1: First use a smaller diameter drill,lead a hole on the Part where the SS Screws into the wall board, then screw the first row of the wall board into the keel.

Step 2: Push the cut wood plastic wall panels to the appropriate position, then screw the wall board, and so on, install in turn. It is recommended that the length of each wood plastic wall panels should not exceed 2.9 meters.

Step 3: After installation to the Wall, each row of the last piece of wood plastic wall panels use stainless steel tapping screws directly fixed on the keel.

Step4: Install “L” shape Side cover. It can be fixed with stainless steel screws.

For plastic wood materials, the water absorption is about 0.2% and the expansion rate is about 0.5%, so when installing this wall Cladding, please leave the corresponding gap between each board (3-5 mm).

Electric drill is a tool that must be used in the installation process; because the plastic wood material has a certain brittleness, when fixing the keel with the WPC material, the lead hole is first drilled, then Fix screws, but don’t directly nailed. Otherwise, the material may crack and break.Nail gun can be used to fix the wall cladding too.Labor gloves are best used during construction.It is recommended to use stainless steel screws to fix the screws during installation.

These are some steps for the installation of wood plastic wall panels. Now everyone should know how to install it.

prev Post

How To Increase The Life Time Of WPC Materials

Next Post

WPC Composite Interior Wall Panels And Outdoor Wall Panels Difference