24 Hours Online

Detailed introduction of wood plastic composite floor installation steps

Wood plastic composite flooring has better physical properties than logs, and has better dimensional stability than wood. It is not easy to crack, warp, and has no wood knots or twill. The film or composite surface can be made into a variety of colorful products, so there is no need for regular maintenance. So this is why people like to decorate their homes with wood plastic composite flooring.
Preparation before installation of wood plastic composite floor
1. From the professional point of view of installing the floor, before starting the installation work, the wood plastic composite floor must be kept in a dry, flat and clean state, so as to better ensure the smooth progress of the subsequent installation work.
2. Prepare installation tools, electric drills, ordinary woodworking tools, labor protection gloves, stainless steel screws, etc., among which electric drills are necessary tools for installing wood plastic composite floors. The wood plastic composite floor is brittle. When fixing the floor and the keel, you must use an electric drill to guide the hole, and then install the screw to fix it to avoid damage to the wood plastic composite floor.
Wood plastic floor installation steps
1. Fix the wood plastic composite keel and evenly arrange the wood plastic composite keel on the cement floor. It is recommended that the distance between each bulge is 30cm. Use an electric drill to guide the hole on the keel. The diameter of the lead hole should not be smaller than the diameter of the screw. Then screw the screw into the drilled hole, and fix the keel on the cement ground. The floor layout is uneven.
2. Fix the first floor. Each wood plastic composite floor has yin and yang grooves on the left and right sides. When paving the first floor, you can use woodworking tools to saw off or grind off the male grooves on the outside of the first floor, and then use an electric drill to guide holes on the surface of the floor, screw in the nail, and fix it on the keel .
3. Fix the second floor. Clamp the male groove of the second wood plastic composite floor to the position of the female groove of the first floor, and then drill the pilot hole on the side of the male groove of the second floor, and screw in the screw to fix it on On the keel, the screw spacing can be controlled by the construction personnel during the installation process. The installation of the wood plastic composite floor in the back is the same as the previous one without any explanation.

Seven Trust

Seven Trust, Author

China's leading wood-plastic manufacturer and supplier. Design inspiration and products - to provide customers with perfect outdoor landscape solutions.

A total of 0 comments

Post a Comment

Contact Details

How Can We Help You?

Request for Approximate Estimation