Cleaning and maintenance of wood plastic products

Normal maintenance:

1. After the WPC floor is installed, use soap, hot water and a stiff brush to remove dirt and residue.
2. Gently wipe the marks printed on the side of the wood-plastic floor with alcohol or acetone.
3. Use a conventional floor cleaner or cleaner containing bleach (sodium hypochlorite) and detergent.
4. Melt ice and calcium chloride or rock salt on the floor, available at most home care stores. When the ice begins to melt, rinse it off.

Oily Stains:

If there are grease stains on the floor, use a household degreasing agent to remove immediately, and then rinse with hot water, not directly with water.

Chalk markers:

Wash chalk-marked areas with hot soapy water and bleach. Colored chalk marks are stubborn and cannot be removed, so consider using white chalk or talc on the floor.

Ink Stains:

Remove ink stains with hot soapy water, then wash thoroughly.

rust:

Use oxalic or phosphoric acid based cleaning products to remove dirt, rust stains from floors. This lightens smudges, and light pollution clears them up.

Use common rust cleaners to remove pigmented stains from weathered floors.

Alcohol or icing:

Wash wine and fruit stains by mixing bleach into hot water according to the directions on the bleach package. Dab the stain lightly and rinse with hot water.

prev Post

Finland builds wooden buildings to promote wood with WPC decking